Front Porch Refresh

This was one of those things that was like Welllll we don’t really NEED to do anything to it but it could definitely look better.

Having moved in during the cold season, we didn’t notice that all of the exterior doors were painted in oil based paint by the seller to just really quickly make them look better in order to sell. This didn’t really become apparent until is started getting warm outside and paint would melt and make the door stick. So we knew that it was neccessary to peel and sand the paint off before this became more of an issue. This is why the only before pictures I have is this one, with most of the paint already peeled off, ready for sanding

door2

The front porch isn’t too big but it’s the right size to be able to fit a few people on and welcome guests to our house before they come in. I wanted it to be inviting and minimally decorated but still give you the idea that you are about to enter a thoughtful home.

before and afterI love it! So what did we do? I decided on these essentials to spruce it up:

  • Paint the door
  • Get matching topiaries for the sides of the door
  • A unique welcome sign
  • New exterior lights
  • New doormat

We had been given the “D” mat as a gift from my dad, and in that “before” picture we had already replaced the lights with a pair from Wayfair that I loved because they matched the new flush light that I put into the entryway just as you come through the front door. (I’ll share a picture of that later).

But when it came to the actual door there was a lot of work to do. First we needed to finish sanding the door, and get to painting. I started scraping/sanding and all of these huge paint chunks started coming off and revealing layers and layers of colors. There was black, green, hunter green, purple, red, and white under there. Unfortunately, because some chunks had already been taken off (whoops) we had to take all of them off.IMG_5574

So our quick easy paint job turned into an all weekend thing consisting of an entire quart of paint stripper and lots and lots of scraping. At one point I was like “I’M DONE, let’s just get a new door.” But we had already done so much work that Goodman assured me that we were making the right decision by doing it ourselves and saving the money.  An entire Trader Joe’s bag of paint scrapes later, we finally finished.

Then had to put a coat of primer on before we actually painted.

After painting we updated the doorknob and added this welcome sign that I found at Class and Trash.

Teal-Front-Door-6

The OCD in me loved that the door handle base that is actually up against the door and the base of the light that is on the wall are the same shape. It makes it look like a set I think. 🙂

Teal-Front-Door-0

Then I went on over to good ole’ Lowes and purchased a couple of cute topiaries and then to Home Goods to get these (extremely heavy) concrete planters. The trees are a little small right now but they will grow to about 4 feet if we don’t accidentally kill them and then we can trim them into shapes – which Goodman is really excited about.

Teal-Front-Door-5

As a final touch we decided to go with southern tradition and paint the ceiling the same teal color as the door, I LOVE IT.

Teal-Front-Door-3

Now I love the way the entry looks! I sometimes even go into the house that way instead of from the side where the driveway is just because I love it so much!

Teal-Front-Door-2Teal-Front-Door-7Teal-Front-Door-4

 

We have been thinking about painting the beams and the railings black to add some more contrast, but I’m really on the fence about it. What do you think? Let me know in the comments!

Total Cost: $225

Wayfair Exterior Lights: 2 @$29.99 each, Doormat: Gift, Thrift Store Welcome Sign: $6,  Waterscape Sherwin Williams Paint: $16, Lowe’s Topiaries:  2 @ $30 each, Home Goods Concrete Planters: 2 @ $13 each, Paint Stripper: $7. Doorknob from Amazon: $50. On hand: Paint Brushes, Drill, Paint Scrapers.

Projects Underway: April

So, I know it’s been a couple of weeks since a last published a post! I’ve planned to post something every week, BUT sometimes projects don’t go as planned and that messes up the schedule a little bit. Also, we have this problem with getting really excited about one project and putting the others on hold. Hopefully we can get a grip on that soon 🙂

I thought I’d give an update on where we are and what you can expect to see, soon! Here’s what we have going on right now:

PROJECT UNDERWAY: Back Deck Makeover

PU-Back-deck-makeover

  • This one got bumped up because I want it to be ready when the nice weather comes back!
  • We are fixing/replacing some boards on the deck and reinforcing the structure
  • Making an outdoor sectional sofa for around our fire pit
  • Painting/refinishing the deck “Cape Cod Gray”
  • Putting lights up
  • Replacing the back door

So, there’s quite a bit more to do out there than I originally expected, but like I said, I want this one done ASAP so I can soak up the sun with my pup.

PROJECT UNDERWAY: Kitchen Island

PU-Kitchen-island

  • We’ve been working on this one forever and are alllllllmost finished
  • We’ve already built the structure
  • Put in the electrical
  • Stained the butcher block top
  • Purchased the bar stools
  • Purchased the microwave
  • Still need to put the doors and shelves on/in
  • and paint them so that I can make the Kitchen Island blog post for you all!

PROJECT UNDERWAY: Front Door Refresh

PU-front-door-refresh

  • We started this one two weeks ago thinking  we could finish in two days.
  • Turns out, the previous owner really liked to repaint the front door – there were layers of black, red, purple, green, light green, and white that we ended up having to strip off.
  • We’re adding some greenery
  • Adding some fresh color
  • Changing up the door hardware
  • Adding new light figures
  • and some other unique touches to warm up the entrance
  • Stay tuned! Almost finished with this one, too.

Be sure to subscribe to the blog if you want to see the posts when they come out!

Redoing Kitchen Cabinets For Less Than $200

When we really started to use and take a close look at our cabinets we realized that they were really poorly repainted at some point. The people who painted them had used some sort of spray paint and didn’t take the time to do it correctly. You could tell from the drips on the face and sides of the cabinets and because of the fact that the hinges were completely painted over [you’re not supposed to do that!]

IMG_5028

We knew that we wanted to replace the quirky (also sort-of tacky) little leaf knobs that were on the cabinets with actual cabinet pulls anyway, so we made the decision to take them all down, sand off the drip marks, repaint and put back up with new hardware.

Sounds easy enough, right? Think again. This proved to be one of the longest projects for us to complete. Mostly because there are so many steps and you have to wait in-between most of them.

Step 1: Taking the cabinets down

First thing we had to do was get the cabinet doors off of the cabinets themselves. Because someone had painted over the hinges this was much harder than it should have been. We literally had to chisel the paint out of the screws and once we got the screws off we had to pry the hinges from the cabinets with knives. It was ridiculous. This is why you shouldn’t take shortcuts and do it the easy way!

Step 2: Cleaning them up

Then we had to chisel the hinges from the cabinet faces. This also took a bunch of time because we have 13 cabinet doors. 13 cabinets X 2 hinges each = 26 hinges to chisel. No bueno.

Then, because we were changing from knobs to pulls we had to fill the existing holes with wood filler. Then wait for that to dry.

Step 3: Sanding

Let me start by saying this – sand outside if you can. Dust will literally get in every spot that air touches if you don’t. For us it was really cold outside and we got impatient so we went ahead sanding in the sunroom thinking that it would just get dusty in there…HAHA. Dust. Got. Everywhere.

The next day we sanded the spots where we put the wood filler down by hand. I started to really look at the cabinets from the back and that’s when I had the greatest idea ever (if I do say so myself). I cabinet-holesnoticed that the inside of the cabinet doors were way prettier and more modern than the actual face of the cabinets. They looked just like modern shaker cabinets while the intentional side looked like cabinets from 1989 (because they were).

Because the hinges were not inset on that side we were able to make the decision to flip the cabinets inside out! I think this made the biggest difference….and it was completely free!

THEN knowing that we were going to flip them, we had to sand and fill all of the spots where the existing hinges attached to the inside of the cabinets. (See left)

 

Step 4: Painting

After that we also decided we wanted to change the paint color.We wanted it to look a little bit less like primer (bright white) and more like a creamy white color that would go well with the brown butcher block of the island. I chose Alabaster White by Sherwin Williams. It was not yellow, not gray, just a creamy milky white. This also meant that we now had to paint the cabinet bases so that they would match. So I painted all of the bases from top to bottom.

Then came the time to paint the actual doors. Let me just say that painting a cabinet door really stinks. You have to paint the whole bottom and little skinny sides and then wait for it to dry, flip it over and paint the other side. Then you have to do it again with the second coat. All 13 freakin’ doors. It was cold outside, so for the 2 days that it took me to do this our living room was filled with a huge drop cloth and cabinet doors. We had to constantly watch Wyatt to make sure paw print accents didn’t find their way onto them. 🙂

cabinets

Step 5: Install Hardware

LASTLY we put the hardware on. Goodman didn’t trust me to do this because the drilling had to be really precise so that the pulls would fit correctly and not be crooked or anything like that.

We put the hinges on first in this case because there were already holes in the base and we purchased the same kind of hinges so that we wouldn’t have to sand and fill and paint and all that on the base of the cabinets.

After putting the doors on the hinges we needed to put the actual pulls on. So, we measured how far from the bottom of the cabinet we wanted the pull to be and then added the distance from the end of the pull to where the screw goes in the pull at the bottom and marked that on every cabinet. After the hardware, we were done!

I’m going to take some better pictures and update the post but here are some pictures of the upper cabinets from my iPhone!

cabinets2

cabinets3

cabinet1

cabinets4

The last thing we did was cut the old wavy wood piece that was above the sink. Goodman thought it’d look good with a curve to match the curves on our appliances. I think it looks great!

cabinet-before-after

Overall I think the whole long process really was worth all of the steps and the time! What do you think?

P.S. We are ALMOST done with the kitchen!  We need to get new countertops, a backsplash, move the microwave into the island (when we finish the electric in the island) and we will be pretty much done! I’ll be doing a post about the island soon and then eventually one for the whole kitchen itself. Stay tuned 🙂

 

Total Cost

$174 plus the tools we had on hand. See details below:

Quart of Sherwin Williams Ovation Semi-Gloss Paint in Alabaster White: $24, 10-Pack 3-inch Center-to-Center Satin Nickel Bar Cabinet Pulls: $110,  Mini Foam Cabinet Roller: $5, 20 Double Pack Hinges found on Amazon: $35. On hand Materials: Wood Filler, Sander and Sandpaper, Drop Cloth, Angled Paint Brush.